CALPEDA MPC Self Priming Plastic Pool Pumps.

Applications

• For water circulation in swimming pool filtration systems.
• For clean or slightly dirty water with solids in suspension.
• For sea water.

Construction

• Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water.
• The pump is made with high quality plastic materials, corrosion and sand erosion resistant.
• With stainless steel diffuser.

Operating Conditions

• Water temperature up to 60°C (up to 35°C for MPCM).
• Ambient temperature up to 40°C.
• Maximum permissible pressure in the pump casing 2.5 bar.
• Continuous duty.

Materials

Components	Material
Pump casing Diffuser cover Impeller	Glass reinforced thermoplastic: PPO-GF30, Noryl
Strainer cover	Transparent polycarbonate, Lexan
Strainer basket	Polypropylene
Diffuser funnel and wear ring	Cr-Ni-Mo steel AISI 316
Mechanical seal	Ceramic alumina, Carbon, FPM (Viton)

Motor

• 2 Pole induction motor, 50Hz (n=2800 1/min).
• MPC : 3ph 230/400V.
• MPCM : 1ph 230V, with thermal protector. Capacitor inside the terminal box.
• Insulation class F.
• Protection IP 54 (splash proof).

Please click here for a technical data sheet (159kb)