CALPEDA
GM10 Submersible Drainage Pumps.
Applications
- For clean
or slightly dirty water, also containing solids up to 8mm grain size.
- For draining
flooded rooms or tanks.
- Extraction
of water from ponds, flowing water or pits for collection of rain water.
For irrigation purposes.
- For outdoor
use, the power supply cable shall have a length not less than 10m.
Construction
- Submersible
drainage pump constructed with composite polymers developed especially for
this product.
- A metal support
ensures correct alignment between the pump shaft and the motor also in heavy
duty conditions.
- Shaft of chrome
steel AISI 430. Three lip seals in NBR.
- Minimum dimension
and high levels of performance, for use i many different applications, for
flow rates up to 200 litres/min.
- With float
switch for automatic stop/start.
Operating Conditions
- Maximum liquid
temperature: 30°C (with immersed motor).
- Immersion
depth: 5m max (with suitable cable length).
- Not suitable
for continuous duty for prolonged time.
Motor
- 2 Pole induction
motor, 50Hz (n=2900 1/min)
- GM10
: 1ph 230V ± 10%, with thermal protector.
- Insulation
class B.
- Protection
IP68.
Special Features
On Request
- Other voltages.
- Frequency
60Hz.
- Cable H07RN-F
4x1mm², length 10m.
- Control box
with capacitor, for pumps without plug.
- Without float
switch.
- With elbow
on discharge port.
Please click here for a technical data sheet
(81kb)